TKHQ 10 A1
GB
│
IE
│
NI
│
15
■
♦
When charging is complete, disconnect the car/USB adapter
0
from
the 12/24 V vehicle socket (cigarette lighter) .
CAUTION
►
In vehicles in which the cigarette lighter also works with the ignition
switched off, the device must be disconnected from the cigarette lighter
after use . Otherwise, the vehicle battery may be discharged over a
long period of time, since the device also uses power when it is idle .
Charging other USB devices
CAUTION
►
If you use both USB sockets
7
/
9
to charge 2 devices at the same time,
the total current consumption may not exceed 5 .4 A (= 5400 mA) .
Otherwise, the car/USB adapter
0
could overload and be damaged .
■
You can also charge other devices that require a 5 V charging voltage
via the two USB sockets
7
/
9
on the car/USB adapter
0
. To do this,
connect the charging cable of your device to one of the USB sockets on
the car/USB adapter
0
.
Status of the car cradle LED
The LED
3
lights up as follows depending on the operating status:
LED
Operating status
White LED lights up for 3 seconds
Car cradle has been connected
White LED lights up permanently
Mobile phone is being charged
White LED off
Stand-by
White LED flashes
Mobile phone is not compatible
IB_401440_TKHQ10A1_LB6.indb 15
IB_401440_TKHQ10A1_LB6.indb 15
28.01.2022 09:53:49
28.01.2022 09:53:49
