Models: 02-1036C0111, 02A1036C0111, 02B1036C0111, 02C1036C0111
10 Ton (9 Metric Ton) Single Stage Jack
07/2018 | Rev. 05
Page | 4
6.0
OPERATION
6.1
OPERATING PARAMETERS
The user shall work in accordance with the Operator Manual.
At no time shall personnel work under the raised load until it is secured by suitable means, i.e. ram locknut.
The employer of the operator shall provide for all necessary training and give information about pumping and translating
forces.
Operate between -20
C and 50
C (-4
F and 122
F).
6.2
NUMERICAL VALUES
Rated Capacity:
20,000 lbs (9,072 kg)
Minimum Closed Height:
36 in (91.44 cm)
Mechanical Extension:
14 in (35.56 cm)
Hydraulic Extension:
20.25 in (51.43 cm)
Maximum Height Obtainable: 70.25 in (178.43 cm)
Weight:
185 lbs (83.9 kg)
Pressure Relief Setting:
2500 + 250/-0 psig
( 172 +17/-0 bars)
Noise level is 64 dB(A) at a distance of 120 in (304.8 cm)
at an inlet pressure of 100 psi (6.9 bar)
6.3
OPERATOR CONTROLS
See illustration
6.4
OPERATING INSTRUCTIONS
The user should be familiar with the following statements prior to
using the jack(s):
CAUTION!
1. NEVER put hands between the aircraft and the
jack pad; as after aircraft has been lowered,
struts may have hung up.
2. NEVER align jack under aircraft by pounding
on jack legs. Dented legs may lead to jack
collapse.
3. ALWAYS lower ram locking nut(s) after jack is under load. Be sure ram nut(s) is seated fully after
jacking.
4. ALWAYS raise and lower jacks simultaneously so that aircraft remains level.
5. ALWAYS use a tail or nose stand, as applicable, for additional stability.
7.4.1
Rules For Operating
1. The user shall work in accordance with the Operator and/or Technical Manuals.
2. At no time shall personnel work under the raised load until it is secured by suitable means, i.e. ram locknut.
3. The employer of the operator shall provide for all necessary training and give information about pumping and translating
forces.
4. Operate between -20
C and 50
C/-4
F and 122
F.
6.4 Operating instructions continued on following page.
Summary of Contents for 02-1036C0111
