Installation guide for part number:
AMP-02
T6
T6 & T6+ are trade names of Trol Systems Inc.
TSI reserves the right to make changes to the information contained in this manual without notice.
publication: AMP2 rev 2 | © 2000 TSI All rights reserved | printed in USA
PWM
Amplifier
Unit
Specifications for PWM Amplifier
Model: AMP-02
Operating Power Requirements
10 to 15vdc @ 10ma.
Output
Sinking configuration (NPN) HEXFET
+95 volts (absolute maximum), back emf protected
27 amps continuous (100% duty cycle)
85 amps intermittent (5% duty cycle)
28 micro second slew rate @ 15 amps
Input
1K ohm impedance, biased supply
Threshold of comparator 50% of + supply .1v hysteresis
Physical
Size
2.9” (75mm) x .88” (22mm) x 4.3” (110 mm)
Mounting
DIN rail only
Weight
6 oz. (170 grams)
Temp
-20 to 140
°
F
Origin
Designed and assembled in the USA.
