AWC708S Motion Control User Manual
WWW.SZTROCEN.COM
57
set too small and should be adjusted appropriately. If the space distance
of laser head is too small and the edge of graphics is not carved completely,
it indicates that the
【
Engrave ACC
】
is set too large and should be reduced
appropriately.
6.7 Common Parameters Settings
On the main page, press
【
Menu
】
and move cursor to
【
Common
Parameters Settings
】
, press
【
Enter
】
.
Fiugre6-7 Common Parameters Settings Interface
6.7.1 Work Mode
On the
Common Params Settings
page, move cursor to
【
Work Mode
】
and press
【
Enter
】
. Press
【↑】
【↓】
to move cursor, press
【←】
【→】
to modify options and press
【
Enter
】
to save settings.
