General Information
68
The outer ring of the switch will
illuminate as follows for each heat
setting:
• OFF - not illuminated
• HOT - red
• WARM - amber.
1
1.
Heated grip switch
For maximum benefit in cold conditions,
from the OFF position press the switch
once for hot (red) initially and then
reduce the heat level by pressing the
switch again for warm (amber) when the
grips have warmed up.
To turn off the heated grips, press and
release the switch until it is not
illuminated.
Low Power Voltage Cut Off
When the detected voltage is lower
than 11.8 volts continually for more than
five minutes the LED in the heated grip
switch will flash five times. After the
fifth flash the main switch will power off
the heated grips and the LED indicator.
The main switch will not power back on
automatically even if the voltage rises to
the safe level.
The user must manually press the
switch again to activate the heated
grips.
If the detected voltage is still lower than
11.8 volts, the LED for the switch will
flash five times again and cut off the
power automatically.
Fuse number four of the front fuse box
protects the heated grip circuit, refer to
the label in the fuse box lid for fuse
amperage.
Fog Lights Switch (If
Equipped)
To turn the fog lights on or off, with the
ignition switch turned to the ON
position, press and release the fog light
switch.
When the fog lights are switched on,
the outer ring of the switch will
illuminate green.
1
1.
Fog light switch
The switch will automatically reset to off
whenever the ignition switch is turned
off then on again.
