General Information
49
Note:
•
The
selected
riding
mode
is
automatically activated one second
after the MODE button is pressed, if
the following conditions are met:
With the Engine Off
The ignition is switched ON
The engine stop switch is in the RUN
position.
With the Engine Running
• Neutral gear is selected or the
clutch is pulled in.
Once the MAP, ABS and TTC settings
have changed, the selected riding mode
will be displayed and the previous mode
will no longer be visible.
1
1.
Selected riding mode
Selecting a Riding Mode –
when Riding the Motorcycle
Warning
The selection of riding modes while the
motorcycle is in motion requires the
rider to allow the motorcycle to coast
(motorcycle moving, engine running,
throttle closed, clutch lever pulled in
and no brakes applied) for a brief
period of time.
Riding mode selection while the
motorcycle is in motion should only be
attempted:
- At low speed
- In traffic free areas
- On straight and level roads or
surfaces
- In good road and weather conditions
- Where it is safe to allow the
motorcycle to briefly coast.
Riding mode selection while the
motorcycle is in motion MUST NOT be
attempted:
- At high speeds
- While riding in traffic
- During cornering or on winding roads
or surfaces
- On steeply inclined roads or surfaces
- In poor road/weather conditions
- Where it is unsafe to allow the
motorcycle to coast.
Failure to observe this important
warning will lead to loss of motorcycle
control and an accident.
