Maintenance
155
Turn Signal Lights
Bulb Replacement
celc
1
2
1.
Turn signal lens
2.
Securing screw
The lens on each turn signal light is held
in place by a securing screw located in
the lens of the light.
Loosen the screw and remove the lens
to gain access to the bulb for
replacement.
Fog Lights (If Equipped)
The
fog
light
units
are
sealed,
maintenance free LED units.
Cleaning
Frequent,
regular
cleaning
is
an
essential part of the maintenance of
your motorcycle. If regularly cleaned,
the appearance will be preserved for
many years. Cleaning with cold water
containing an automotive cleaner is
essential at all times but particularly so
after exposure to sea breezes, sea
water, dusty or muddy roads and in
winter when roads are treated for ice
and snow. Do not use household
detergent, as the use of such products
will lead to premature corrosion.
Although, under the terms of your
motorcycle warranty, cover is provided
against the corrosion of certain items,
the owner is expected to observe this
reasonable advice which will safeguard
against corrosion and enhance the
appearance of the motorcycle.
Care of Matt Paintwork
Matt paintwork requires no greater care
than that already recommended for
high gloss paintwork.
• Do not use any polish or wax on
components.
• Do not try and polish out scratches.
Preparation for Washing
Before washing, precautions must be
taken to keep water off the following
places.
Rear opening of the exhausts: Cover
with a plastic bag secured with rubber
bands.
Clutch and brake levers, switch housings
on the handlebar: Cover with plastic
bags.
Ignition switch and steering lock: Cover
the keyhole with tape.
