Triumph Tiger 900 GT, Owner'S Handbook Manual

Page: 88 / 204

General Information
88
Rider's Seat Height Adjustment
Warning
Always adjust both seat height
adjusters. Adjusting only one height
adjuster may prevent correct fitment
of the seat.
Riding the motorcycle with an
incorrectly fitted seat may cause loss
of motorcycle control and an accident.
Warning
After adjusting the seat height,
operate the motorcycle in an area free
from traffic to gain familiarity with the
new seat position.
Riding the motorcycle with the seat in
an unfamiliar position may cause loss
of motorcycle control and an accident.
The rider's seat is adjustable for height
by approximately 20 mm.
5
5
4
3
4
2 1
1. Rider's seat
2. Front seat height adjuster
3. Rear seat height adjuster
4. Low seat height position (rear shown)
5. High seat height position (rear shown)
To adjust the rider's seat:
• Remove the rider's seat (see
page 87).
• Reposition both seat height
adjusters to the higher or lower
position as required.
• Make sure that both adjuster rails
are fully engaged in their brackets
on the seat.
• Refit the rider's seat making sure
the seat tongue is under the upper
bar on the fuel tank for the high
seat position, or under the lower
bar on the fuel tank for the low seat
position, (see page 87).
Heated Seats (if fitted)
The heated seats switches (if fitted)
are located on the left hand side of the
motorcycle.
1
2
1. Rider’s heated seat switch location
2. Passenger’s heated seat switch location
The heated seats will only heat when
the engine is running. When the heated
seats are switched on, the heated seats
symbol will appear in the display. The
selected heat level for each seat will
also be indicated by the colour of the
symbol.