General Information
63
Reset to Defaults
The Reset to Default option allows the
Main Menu display items to be reset to
the default setting.
To reset the Main Menu display items:
• From the Main Menu, push the
joystick down and select RESET TO
DEFAULTS.
• Push the joystick down/up to
select CONFIRM or CANCEL. Press
the joystick centre to confirm the
selection.
– Confirm–The following main
menu settings and data will
be reset to the factory default
values–Riding Modes, Indicator
Set Up, Trip Computers,
Visible Trays, Language,
Traction Control, Style, Display
Brightness, Lap Timer settings
and data.
– Cancel–The main menu settings
and data will remain unchanged
and the display will return to the
previous menu level.
Information Tray
Warning
When the motorcycle is in motion,
only attempt to switch between the
information tray modes or reset the
fuel information under the following
conditions:
- At low speed
- In traffic free areas
-
On straight and level roads or
surfaces
- In good road and weather conditions.
Failure to observe this important
warning could lead to loss of
motorcycle control and an accident.
The information tray allows easy
access to different motorcycle status
information. Any warning messages
must first be acknowledged before the
information tray can be accessed, see
page 64.
The information tray appears in the top
section of the display screen for styles
01, 02 and 03. It appears on the left
hand side of the display screen for style
04.
To view the information trays in styles
01, 02 and 03, push the joystick down/
up.
To view the information trays in style
04, push the joystick left/right.
Summary of Contents for Tiger 900 GT
