Triumph Tiger 900 GT, Owner'S Handbook Manual

Page: 160 / 204

Maintenance
160
• Release and remove the tool kit tray
fixing (if the tool kit tray is fitted).
• Lift the tool kit tray up and to the
rear of the motorcycle until it stops
in an upright position.
1
4
2 3
1. Positive (+) terminal
2. Battery strap
3. Battery cover
4. Negative (-) terminal
• Remove the battery strap.
• Remove the battery cover, noting
the orientation of the cover and the
leads.
• Disconnect the battery leads,
negative lead first.
• Remove the battery out of the case.
Battery Disposal
Should the battery ever require
replacement, the original battery must
be handed to a recycling agent who
will make sure that the dangerous
substances from which the battery
is manufactured do not pollute the
environment.
Battery Maintenance
Warning
Battery acid is corrosive and
poisonous and will cause damage to
unprotected skin.
Never swallow battery acid or allow it
to come into contact with the skin.
To prevent injury, always wear eye
and skin protection when handling the
battery.
The battery is a sealed type and does
not require any maintenance other
than checking the voltage and routine
recharging when required, such as
during storage.
Clean the battery using a clean,
dry cloth. Make sure that the cable
connections are clean.
It is not possible to adjust the battery
acid level in the battery; the sealing
strip must not be removed.