Triumph Street Triple R 2022, Owner'S Handbook Manual

Page: 88 / 237

GENERAL INFORMATION
88
Tire Pressure Units - only if TPMS is
equipped
1 2
4
3
5
6
1. TPMS symbol
2. Front tire indicator
3. Rear tire indicator
4. Tire pressure display
5. Scroll button
6. Set button
To access the tire pressure display:
▼ Press and release the SCROLL button
until SEtUP is shown in the display
screen.
▼ Press and release the SET button.
▼ Press and release the SCROLL button
until UnitS is shown in the display
screen.
▼
Press and release the SET button to
select the pressure display.
▼
Press and release the SCROLL button
to scroll between BAR or PSI.
▼
Press and release the SET button to
select either BAR or PSI.
▼
When the tire pressure monitoring
system has been selected, —— PSI or
bAR will be shown in the display
screen until the motorcycle is
traveling at a speed greater than 12
mph (20 km) and the tire pressure
signal is received.
To exit the tire pressure display:
▼
Press and release the SCROLL button
until REtURn is shown.
▼ Press and release the SET button to
return to the TRIP screen
Return
Select REtURn to return to the main
display.
Trip Meter
Warning
Do not attempt to switch between trip
meter display modes or reset the trip
meter with the motorcycle in motion
as this may lead to loss of motorcycle
control and an accident.
1
1. Trip meter display
To access the trip meter information
press and release the TRIP button on
the left handlebar switch housing until
the required display is shown.