General Information
78
• Remove the two rider's seat fixings
at the rear of the seat.
B01238
1
2
1. Rider's seat fixings
• Lift the seat up from the back
and slide rearwards for complete
removal from the motorcycle.
B01239
1
2
1. Tongue (rider's seat)
2. Fuel tank bracket
Rider's Seat Installation
Warning
Never ride the motorcycle with the
seat fixings loose or removed, as both
seats will not be secure and may move.
The rider's and passenger seats are
only correctly retained and supported
once the seat fixings are correctly
tightened.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
To install the rider's seat:
• Engage the seat’s tongue under the
fuel tank bracket.
B01239
1
2
1. Tongue (rider's seat)
2. Fuel tank bracket
• Lower the rear of the seat until it
aligns with the holes on the rear
subframe.
Summary of Contents for Speed Triple 1200 RS
