Triumph Speed Triple 1200 RS, Owner'S Handbook Manual

Page: 76 / 184

General Information
76
Seats
Warning
Make sure the motorcycle is stabilised
and adequately supported.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle may fall,
causing injury to the operator or
damage to the motorcycle.
Caution
To prevent damage to the seats or
seat covers, care must be taken not to
drop the seats.
Do not lean the seats against the
motorcycle or any surface which may
damage the seats or seat covers.
Instead, place the seats, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seats
which may cause damage or staining
to the seat covers.
For seat cleaning information, see
page 164.
Passenger Seat/Seat Cowl Removal
To remove the passenger seat or seat
cowl (referred to as passenger seat for
this procedure):
• Release the passenger seat cap.
• Remove the passenger seat cap
fixing.
B01233
1
2
1. Passenger seat cap (passenger seat
fixing underneath)
2. Passenger seat
3. Rider's seat
Note
Do not pull the passenger seat upwards
during removal.
B01235
1
2
1. Slot (seat)
2. Tongue (subframe casing)
• Release the passenger seat's slot
from the tongue and slide forwards
for complete removal from the
motorcycle.