Triumph Speed Triple 1200 RS, Owner'S Handbook Manual

Page: 24 / 184

General Information
24
• Remove the battery cover fixing
using a 1.5 mm AF Allen key.
• Remove the battery cover.
• Remove the battery, noting its
orientation.
• Insert a new 3 Volt CR2032 Lithium
battery.
• Replace the battery cover making
sure that it aligns correctly.
• Refit the battery cover fixing and
tighten to 0.3 Nm.
Battery Disposal
The used battery must be handed to a
recycling agent who will make sure that
the dangerous substances from which
the battery is manufactured do not
pollute the environment.
Keyless Ignition
The keyless ignition system allows the
motorcycle to be started without the
use of a mechanical key.
Smart Key Operation
To turn the motorcycle on with the
keyless ignition:
• The smart key must be within close
proximity (one metre/three feet) of
a system sensor. There is a system
sensor located on the right hand
side of the motorcycle, and another
system sensor located at the front
of the motorcycle. If the smart key
is out of range of a system sensor
then it will be unresponsive and the
keyless ignition cannot be activated.
2
1
1. Status symbol light
2. ON/OFF button