Triumph Speed Triple 1200 RR 2021, Owner'S Handbook Manual

Page: 68 / 212

GENERAL INFORMATION
68
High Beam Button
The high beam button has a different
function depending on whether Daytime
Running Lights (DRL) are fitted or not.
When the high beam is turned on, the
high beam indicator light will illuminate
in the display.
Models with Daytime Running Lights
(DRL)
If the DRL switch is in the Daytime
Running Lights (DRL) position, then
press and hold the high beam button to
turn the high beam on. It will remain on
as long as the button is held in and will
turn off as soon as the button is
released.
If the DRL switch is in the dip beam
position, press the high beam button to
switch the high beam on. Each press of
the button will swap between dip and
high beam.
Note
A lighting on/off switch is not fitted to
this model. The rear light and licence
plate light all function automatically
when the ignition is turned on.
The headlight will function when the
ignition is turned on and the engine is
running.
Models without Daytime Running Lights
(DRL)
Press the high beam button to switch
the high beam on. Each press of the
button will swap between dip and high
beam.
Note
A lighting on/off switch is not fitted to
this model. The position light, rear light
and licence plate light all function
automatically when the ignition is
turned on.
The headlight will function when the
ignition is turned on and the engine is
running.