Instruments
32
Riding Modes
The riding modes allow adjustment of
the throttle response (MAP), Anti-lock
Brake System (ABS) and Traction Control
(TC) settings to suit differing road
conditions and rider preferences. Riding
modes are available depending on the
motorcycle model’s specification.
Riding modes can be conveniently
selected using the MODE button and
joystick located on the left hand switch
housing, whilst the motorcycle is
stationary or moving.
Each riding mode is adjustable.
Availability of the ABS, MAP and TC
setting options vary between models.
For more information, see page 43. If
a riding mode is edited (other than the
Rider mode), the icon will change as
shown below.
Default Icon Rider Edited
Icon
Description
-
Rider
Rain
Road
Sport
Riding Mode Selection
Warning
The selection of riding modes whilst
the motorcycle is in motion requires
the rider to allow the motorcycle to
coast (motorcycle moving, engine
running, throttle closed and no brakes
applied) for a brief period of time.
Riding mode selection whilst the
motorcycle is in motion should only be
attempted:
- At low speed
- In traffic-free areas
-
On straight and level roads or
surfaces
- In good road and weather conditions
-
Where it is safe to allow the
motorcycle to briefly coast.
Riding mode selection whilst the
motorcycle is in motion MUST NOT be
attempted:
- At high speeds
- Whilst riding in traffic
- During cornering or on winding roads
or surfaces
- On steeply inclined roads or surfaces
- In poor road/weather conditions
-
Where it is unsafe to allow the
motorcycle to coast.
Failure to observe this important
warning may lead to loss of
motorcycle control and an accident.
Summary of Contents for Rocket 3 TFC 2020
