Triumph Daytona Moto2 765 2020, Owner'S Handbook Manual

Page: 26 / 163

General Information
26
Clutch Lever
Warning
Do not attempt to adjust the levers
with the motorcycle in motion as this
may lead to loss of motorcycle control
and an accident.
After adjusting the levers, operate the
motorcycle in an area free from traffic
to gain familiarity with the new lever
setting.
Do not loan your motorcycle to
anyone as they may change the lever
setting from the one you are familiar
with causing loss of motorcycle
control and an accident.
A span adjuster is fitted to the clutch
lever. The adjuster allows the distance
from the handlebar to the clutch lever
to be changed to suit the span of the
rider's hand.
1 2
1. Span adjuster
2. Clutch lever
To adjust the clutch lever span:
• Rotate the span adjuster
anticlockwise to decrease the
distance to the handlebar or
clockwise to increase the distance
from the handlebar.
• The distance from the handlebar
grip to the released clutch lever is
shortest when the adjuster wheel is
adjusted fully anticlockwise.
Throttle Control
An electronic throttle twist grip controls
the opening and closing of the throttles
via the engine’s electronic control
module. There are no direct-acting
cables in the system.
The throttle grip has a resistive feel to it
as it is rolled rearwards to open the
throttles. When the grip is released it
will return to the throttle closed position
by its internal return spring and the
throttles will close.
There are no user adjustments for the
throttle control.
1
1. Throttle closed position