Triumph Connectivity Module, Owner'S Handbook Manual

Page: 39 / 41

Approval Information
39
Approval Information
Radio Equipment Device EU Directive
2014/53
Triumph motorcycles are equipped with
a range of radio equipment devices.
These radio equipment devices must
comply with the EU Radio Equipment
Device Directive 2014/53/EU.
The complete text of the EU declaration
of conformity for each radio equipment
device is available at the following
address:
www.triumphmotorcycles.co.uk/public-
content/triumph-radio-device-approvals
FCC Warning Statement:
• This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference
received, including
interference that may cause
undesired operation.
• This equipment complies with FCC
radiation exposure limits set forth
for an uncontrolled environment.
End users must follow the specific
operating instructions for satisfying
RF
exposure compliance. This
transmitter must not be co-located
or operating in conjunction with any
other antenna or transmitter.
• Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to operate
the equipment.
Industry Canada RSS Warning
Statement:
EN
Under Industry Canada regulations, this
radio transmitter may only operate
using an antenna of a type and
maximum (or lesser) gain approved for
the transmitter by Industry Canada.
To reduce potential radio interference to
other users, the antenna type and its
gain should be so chosen that the
equivalent isotropically radiated power
(e.i.r.p.) is not more than that necessary
for successful communication.
This device complies with Industry
Canada licence-exempt RSS standard(s).
Operation is subject to the following two
conditions:
1. this device may not cause
interference, and
2. this device must accept any
interference, including interference
that may cause undesired operation
of the device.