background image

Accessories, Loading and Passengers

73

 Warning

Bonneville Bobber
This motorcycle is designed for use 

as a two-wheeled vehicle capable of 

carrying a rider on his/her own.
Operation of this motorcycle with a 

passenger is dangerous and could lead 

to loss of control and an accident.

 Warning

Do not carry a passenger unless he 

or she is tall enough to reach the 

footrests provided.
A passenger who is not tall enough 

to reach the footrests will be unable 

to sit securely on the motorcycle and 

may cause instability leading to loss of 

control and an accident.

 Warning

The handling and braking capabilities 

of a motorcycle will be affected by the 

presence of a passenger.
The rider must make allowances for 

these changes when operating the 

motorcycle with a passenger and 

should not attempt such operation 

unless trained to do so and without 

becoming familiar and comfortable 

with the changes in motorcycle 

operating characteristics that this 

brings about.
Motorcycle operation without making 

allowances for the presence of a 

passenger could lead to loss of 

motorcycle control and an accident.

 Warning

Your passenger should be instructed 

that he or she can cause loss of 

motorcycle control by making sudden 

movements or by adopting an 

incorrect seated position.
The rider should instruct the 

passenger as follows:
-  

It is important that the passenger 

sits still while the motorcycle is in 

motion and does not interfere with 

the operation of the motorcycle.

-  

To keep his or her feet on the 

passenger footrests and to firmly 

hold onto the seat strap or the 

rider's waist or hips.

-  

Advise the passenger to lean with 

the rider when travelling around 

corners and not to lean unless the 

rider does so.

 Warning

Do not carry animals on your 

motorcycle.
An animal could make sudden and 

unpredictable movements that could 

lead to loss of motorcycle control and 

an accident.

Summary of Contents for Bonneville Bobber















































































































































Reviews: