Triumph Adler UTAX PF 780 Service Manual Download

Page: 53 / 139

3NL-2

1-3-24

U251

Checking/clearing the maintenance counter

Description

Displays and clears or changes the maintenance count and automatic grayscale adjustment
count.

Purpose

To verify the maintenance counter count and automatic grayscale count. Also to clear the count
during maintenance service.

Setting

1. Press the start key.
2. Select the item to be changed.
3. Change the setting using the +/- keys or numeric keys.

4. Press the start key. The value is set.

Clearing

1. Select [Clear].
2. Press the start key. The setting value is cleared.

Completion

Press the stop key. The screen for selecting a maintenance item No. is displayed.

* : When the firmware is upgraded in the field, input the counter value of U901 into the pri-

mary feed counter.
If the counter value is larger than 150000, replace the primary feed roller and input "0".

Item No.

Description

Display

Description

Setting

range

Initial setting

M.Cnt A

Count value for maintenance cycle (kit A)

0 to 9999999

M.Cnt B

Count value for maintenance cycle (kit B)

0 to 9999999

M.Cnt C

Count value for maintenance cycle (kit C)

0 to 9999999

M.Cnt D

Count value for maintenance cycle (kit D)

0 to 9999999

M.Cnt E

Count value for maintenance cycle (kit E)

0 to 9999999

M.Cnt HT

Automatic grayscale adjustment count

0 to 9999999

Cassette 1 Maintenance counter cassette1

0 to 9999999

Cassette 2 Maintenance counter cassette2

0 to 9999999

Cassette 3 Maintenance counter cassette3

0 to 9999999

Cassette 4 Maintenance counter cassette4

0 to 9999999

Cassette 5 Maintenance counter cassette5

0 to 9999999

Cassette 6 Maintenance counter cassette6

0 to 9999999

Cassette 7 Maintenance counter cassette7

0 to 9999999

Clear

Maintenance counter all clear

0 to 9999999

Summary of Contents for UTAX PF 780












































































































































Search results

Summary of Contents for UTAX PF 780

Reviews:

Related manuals for UTAX PF 780

Brands by name

Popular brands

Triumph Adler UTAX PF 780, Service Manual

Search results

Summary of Contents for UTAX PF 780

Reviews:

Related manuals for UTAX PF 780

Brands by name

Popular brands