Triumph Adler P-C3065 MFP Operation Manual Download Page 46

Page: 46 / 184

3-15

Sending Faxes > Login/Logout

Logging in when Job Accounting has been Enabled

When job accounting has been enabled, you need to enter an Account ID when using the machine.

Login

Enter the account ID.

If this screen is displayed during operations, enter the account ID.

Log in.

Select the [

] key.

Logout

To logout from the machine, select the [

Authentication/Logout

] key to return to the login user

name/login password entry screen.

NOTE

If you entered a wrong character, select the [

Clear

] key and enter the account ID again.

If the entered account ID does not match the registered ID, a warning beep will sound and
login will fail. Enter the correct account ID.

By selecting [

Counter

], you can refer to the number of pages printed and the number of

pages scanned.

Summary of Contents for P-C3065 MFP

























































































































































































Search results

Summary of Contents for P-C3065 MFP

Reviews:

Brands by name

Popular brands

Triumph Adler P-C3065 MFP, Operation Manual

Search results

Summary of Contents for P-C3065 MFP

Reviews:

Brands by name

Popular brands