manualshive.com logo in svg

Triumph Adler P-C3065 MFP, Operation Manual

Share
Download
Triumph Adler P-C3065 MFP Operation Manual Download Page 143

8-6

Fax Settings > Default fax settings

FAX

Settings related to the fax function can be configured.

TX/RX Common

Transmission

Item

Description

Encryption Key

This is used to register an encryption key for encrypted communication.

Encryption (page 5-21)

Item

Description

Local FAX Name

Register the local FAX name printed in the transmit terminal identification (TTI) area.

Local FAX Name (page 2-7)

Local FAX ID

Register the local FAX ID.

Local FAX ID (page 2-8)

NOTE

: The Local FAX ID is used for transmission limit purposes. 

Transmission Restriction (page 8-10)

Local FAX Number

Register the local FAX number printed in the transmit terminal identification (TTI) area.

Local FAX Number (page 2-8)

TTI

The transmit terminal identification (TTI) is the information about the sending machine (transmit 
terminal) that is printed by the receiving machine on the received fax. The information includes 
the date and time of transmission, number of pages sent, name and fax number. This machine 
enables the user to select if the TTI is printed out on the fax on the receiving system. Regarding 
the location of the information to be printed, you can select inside or outside of the page image 
being sent.

Value

: Off, Outside, Inside

NOTE

: Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). 

However, when job accounting has been enabled, and you send originals after entering an 
Account ID, the Account Name is printed.

TTI (Transmit Terminal Identification) (page 2-7)

Account Name Use

Select whether or not to use account name as local FAX name.

Value

: Off, On

FAX Dialing Mode

Select the telephone line according to the type you are contracted with. Please note that 
selecting a wrong telephone line will prevent you from sending fax.

Value

: Tone(DTMF), Pulse(10PPS)

NOTE

: This setting does not appear in some regions.

FAX Dialing Mode (page 2-9)

Retry Times

The number of retry times can be changed automatically.

Value

: 0 - 14

Summary of Contents for P-C3065 MFP

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands