8-36
Setup and Registration (System Menu) > System Menu
Restart Network
Primary Network (Client)
[
System Menu/Counter
] key > [
System/Network
] > [
Primary Network (Client)
]
Interface Block Setting
[
System Menu/Counter
] key > [
System/Network
] > [
Interface Block Setting
]
This allows you to protect this machine by blocking the interface with external devices such as USB hosts.
Security Level
[
System Menu/Counter
] key > [
System/Network
] > [
Security Level
]
Item
Description
Restart Network
Restarts the network.
Item
Description
Primary Network (Client)
Specify the network to be used for the send function, the network authentication and
connecting to external address book.
Value
: Wi-Fi, Wired Network
Item
Description
USB Host
This locks and protects the USB port (USB host).
Value
: Unblock, Block
USB Device
This locks and protects the USB interface connector (USB Device).
Value
: Unblock, Block
USB Storage
This locks and protects the USB memory slot.
Value
: Unblock, Block
NOTE
This function is available when USB Host is set to [
Unblock
].
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item
Description
Security Level
Specify the security level.
Value
Low:
This mode is used during maintenance. Do not use normally.
High:
This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
