8-29
Setup and Registration (System Menu) > System Menu
Wired Network Settings
Configure wired network settings.
Item
Description
IPv6
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [
TCP/IP
] is [
On
].
IPv6
Select whether to use IPv6.
Value
: Off, On
NOTE
Selecting [
On
] displays IP address in [
IP Address (Link Local)
] after restarting the network.
Manual Setting
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of
four-digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
•
This function is displayed when [
IPv6
] is set to [
On
].
•
To enter "Default Gateway", set [
RA (Stateless)
] to [
Off
].
RA (Stateless)
Select whether to use RA (Stateless).
Value
: Off, On
NOTE
•
This function is displayed when [
IPv6
] is set to [
On
].
•
Selecting [
On
] displays IP address in [
IP Address (Stateless)
] after restarting the network.
DHCP
Select whether to use the DHCP (IPv6) server.
Value
: Off, On
NOTE
•
This function is displayed when [
IPv6
] is set to [
On
].
•
Selecting [
On
] displays IP address in [
IP Address (Stateful)
] after restarting the network.
Restart Network
Restarts the network.
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Item
Description
TCP/IP Setting
For details on setting value.
LAN Interface
Specify the settings for the LAN interface to be used.
Value
: Auto, 10BASE-Half, 10BASE-Full, 100BASE-Half, 100BASE-Full, 1000BASE-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
