Triumph Adler P-4532DN Operation Manual Download

Page: 213 / 282

9-26

User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting

Using Job Accounting

This section explains procedures while setting job accounting.

Login/Logout

If job accounting is enabled, an account ID entry screen appears each time you use this machine.

Use the procedure below to login and logout.

Login

In the account ID entry screen, enter the account ID using the numeric keys and select the
[

] key.

When the screen to enter the login user name and password appears

If user login administration is enabled, the screen to enter the login user name and password
appears. Enter a login user name and password to login.

Proceed to complete the rest of the steps.

Logout

When the operations are complete, select the [

Logout

] key to return to the account ID entry screen.

NOTE

• If you entered a wrong character, select the [

Clear

] key and enter the account ID

again.

• If the entered account ID does not match the registered ID, a warning beep will sound

and login will fail. Enter the correct account ID.

Adding a User (Local User List) (page 9-5)

Summary of Contents for P-4532DN



























































































































































































































































































Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands

Triumph Adler P-4532DN, Operation Manual

Search results

Summary of Contents for P-4532DN

Reviews:

Related manuals for P-4532DN

Brands by name

Popular brands