Triumph Adler DC 2130 Instruction Handbook Manual Download

Page: 272 / 287

Section 10 MAINTENANCE AND OPERATION INFORMATION

10-4

Take out the new toner container from the bag, and then tap
it on the top 5 to 6 times.

Thoroughly shake the toner container (in the direction of the
arrow) ten times or more to loosen and mix the toner inside.

Grasp the handle on the toner container and insert the toner
container along the rail of the copier.

Hold the toner container by hands and fully insert it into the
copier.

Remove the waste toner box.

Close the opening of the waste toner box with its seal.

<Cleaning the related parts>

Remove the cap from the grid cleaner.

CAUTION

DO NOT attempt to incinerate the toner container or
the waste toner box. Dangerous sparks may cause
burns.

CAUTION

DO NOT attempt to force open or destroy the toner
container or the waste toner box.

Summary of Contents for DC 2130
































































































































































































































































































Search results

Summary of Contents for DC 2130

Reviews:

Related manuals for DC 2130

Brands by name

Popular brands

Triumph Adler DC 2130, Instruction Handbook Manual

Search results

Summary of Contents for DC 2130

Reviews:

Related manuals for DC 2130

Brands by name

Popular brands