Triumph Adler CLP 4526, Instruction Handbook Manual

Page: 43 / 156

3.1 Understanding the Operator Panel
3-3
Error codes
See Chapter 4 Troubleshooting .
3.1.2 Indicators in message display
Figure 3-2
Interface indicator (INTERFACE)
The interface indicator shows the interface that is currently in use:
Each interface has a timeout time of 30 seconds during which the other interface should wait
to receive a print job. Even a print job has been complete on the interface, you should wait
for this period until the other interface begins printing the job.
Sleeping
The printer is in sleep mode. The printer wakes from sleep mode
whenever a key on the operator panel is pressed, the cover is
opened or closed, or a print job is received. The printer then
warms up and goes on-line. For details on sleep mode, see
Sleep
timer timeout on page 3-59 .
Cancelling data
Jobs inside the printer are being canceled. To cancel a job, see
Section 3.1.3 Keys on page 3-6 .
Waiting
The printer is waiting for the rest of print job before completing
the last page. Pressing the
GO key allows you to obtain the last
page immediately. See below.
FormFeed TimeOut
The printer is printing the last page after a waiting period.
PAR
Parallel interface is in use.
NET Network interface is in use.
OPT Option network interface is in use.
SER
Option serial (RS-232C) interface is in use.
--- No interface is in use.
Message Meaning
Table 3-1 (Continued)