5-8
Using Convenient Fax Functions > Sub Address Box Function
Sub Address Box Function
Sub Address Box
A Sub Address Box is a box for storing received originals on the machine to which the FAX System is to be installed.
Using sub address reception function, you can store received originals in a personal Sub Address Box.
For the method for using a Sub Address Box, see the next section.
• Registering a Sub Address Box
• Changing/Deleting Sub Address Box
For the method for manipulating a received fax stored in a Sub Address Box, see the next section.
• Printing Originals from a Sub Address Box
• Deleting Originals after Printing from a Sub Address Box
• Deleting Originals from a Sub Address Box
• Printing a Sub Address Box List
For the method for transmitting to a Sub Address Box, see the next section.
Sub Address Communication
Sub address communication is communication in which data is sent and received with sub addresses and passwords
attached in conformance with the ITU-T (International Telecommunication Union) recommendations. Sub addresses
enable communication modes with third-party machines that were previously only possible between our brand
machines. These include confidential delivery (sending originals to an original delivery box set up in the receiving
system) and polling communication (reception of documents from a source machine that is controlled from the receiving
machine). Using sub address communication on this machine also allows advanced communication functions such as
storing received originals in Sub Address Boxes.
Sub address-based communication can be used together with various kind of functional communication.
When registering a sub address and sub address password in the Address Book and One Touch Key, you can omit their
entry before transmission. For details, refer to the explanations in the procedure of each communication method and
registration method.
Sub Address
With the machine, sub address and sub address passwords are called sub address.
Sub Address
Use the numbers from 0 to 9, ‘ (space)’, and ‘#’ and ‘*’ characters to enter a sub address of up to 20 digits. When the
machine receives faxes, a sub address is used to specify the Sub Address Box.
Sub Address Password
Use the numbers from 0 to 9, alphabets, ‘ (space)’, and ‘#’ and ‘*’ characters to enter a sub address password of up to
20 digits. When the machine receives originals, a sub address password is not used.
For the procedure for setting a sub address, refer to the following:
Sub Address Transmission (page 5-14)
NOTE
In order to conduct sub address communication, the other party’s system also needs to be equipped with sub address
communication functions of the same type.
Summary of Contents for 355ci
Page 1: ...FAX Operation Guide ...
Page 183: ......
Page 184: ...First edition 2017 4 2VMGEEN500 ...