Triumph Adler 350ci, Operation Manual

Page: 373 / 568

8-44
Setup and Registration (System Menu) > System Menu
Protocol Settings
Item Description
SMTP (E-mail TX) Select whether to send E-mail using SMTP.
Value : Off, On
POP3 (E-mail RX) Select whether to receive E-mail using POP3.
Value : Off, On
FTP Client (Transmission) Select whether to send documents using FTP. To use the FTP Client, set the protocol to [ On ].
The default port number is 21.
Value : Off, On
FTP Server (Reception) Select whether to receive documents using FTP.
*1
Value : Off, On
SMB Client (Transmission): Select whether to send documents using SMB. To use the SMB Client, set the protocol to [ On ].
The default port number is 445.
Value : Off, On
NetBEUI Selects whether to receive documents using NetBEUI.
*1
Value : Off, On
WSD Scan Select whether to use WSD Scan.
*1
Value : Off, On
WSD Print Set whether to use our proprietary web services. WIA driver, TWAIN driver and Network FAX
driver use this Enhanced WSD web service.
*1
Value : Off, On
i-FAX Select whether to use i-FAX.
Value : Off, On
NOTE
This function is displayed when the optional Internet FAX Kit is activated.
DSM Scan Select whether to use DSM scan.
*1
Value : Off, On
ThinPrint Select whether to use ThinPrint. To use the Thin Print protocol, set the protocol to [ On ]. The
default port number is 4000.
*1, *2
Value : Off, On
NOTE
This function is displayed only when the optional ThinPrint Option is activated.
Thin Print over SSL To use the Thin Print over SSL protocol, set [ Thin Print Over SSL ] and [ SSL ] to [ On ].
Value : Off, On
NOTE
When selecting [ On ], it also requires a certificate for SSL. The default certificate is the self-
certificate of the machine.
Embedded Web Server RX User Guide
LPD Selects whether to receive documents using LPD.
*1
Value : Off, On
Raw Select whether to receive documents using Raw Port.
*1
Value : Off, On
IPP Selects whether to receive documents using IPP. To use the IPP protocol, set [ IPP ] to [ On ], and
set [ SSL ] to [ Off ]. In addition, select [ Not Secure (IPP&IPPS) ] on IPP Security under Security
Settings from the Embedded Web Server RX. The default port number is 631.
*1
Value : Off, On