Triton Systems ©
4
TDN 07103-04303
**NOTE**
•
Before starting the SDD to MMR050 Conversion installation, verify the ATM software has the minimum
software version: 4.2.3.6 installed onto the ATM. If not, obtain Technical Bulletin 22-02, ARGO 4.2 MMR050
Software Release Notes, at www.triton.com web page and follow instructions to load the correct software for
your ARGO ATM.
•
If the ATM has the minimum required software, perform a proper shut down of the unit and disconnect the
input power cord from the power supply.
1. Open the Vault. Grasp the cassette handle,
RED
arrows in
Left Image
, and pull the cassette out of the dis-
penser. Press the rail latch down,
Yellow
arrow in
Right Image
, and slide the rails out until fully extended.
2. Loosen the wing nuts,
Left Image
, but do not remove from post,
Right Image
.
