8.
english
User manual | Triton Blue TB-SPARKLE-1-5 | September 2019 | www.triton-blue.com
SAFETY
Warnings and Cautions
The sign is to remind users of paying attention
to risk and security. Please note that the
machines are not meant to be a continuous
duration effect. The maximum running time
is 30 second and can be repeated but should
not be done to overheat the machine.
Eye Protection
Eye protection warning sign is to remind you
of protecting the eyes during the machine
operation.
Injury Voltages
Warning: Dangerous voltages are present in
this machine when electrical power is applied.
There is a danger of injury from electric shock.
Under no circumstances are you to attempt
to open the machine or attempt to remove
or adjust any components fitted within the
machine. Only fully trained engineers can
open the equipment.
Caution Against Liquids
Use caution so that any liquids do not
wet the machine. Keep the machine
and controller dry and not use rainy
or snowy days unless covered.
Warning
Please prevent anything from ente-
ring the fountain port, if this hap-
pens.
Please clear obstructions before con-
tinuing operation.
Please prevent machine from drop-
ping when installing “DAMAGE CAN
OCCUR”.
Cleaning
Please inspect fountain nozzle
before use and confirm whether
there are accumulation granulates. If
it does, please clean out by inverting
the machine to clean out port.
SECURITY CONSIDERATIONS
1. Unauthorized repair is prohibited, or else it may cause serious accident.
2. Keep Cspark dry and do NOT use in rain or snow.
3. Make sure the hopper lid is well covered when use Cspark. Accidentally Burning of Composite Ti can only use
sands to extinguish. Composite Ti should be stored in a dry sealed environment.
4. Keep audience and flammable material at a minimum distance of 3m from Cspark. Make sure sparks shooting
out from Cspark can NOT reach any objects.
5. It is necessary to clean the Composite Ti remains in the pipe before and after the show. Check whether there
are Composite Ti remains in the nozzle after each show. If it does, please clean it up, or else it will affect the
shooting effect or even damage Cspark.
6. Connection maximum is 6 pieces, and over-connection may result in damage or even fire.
7. For better heat dissipation, do NOT block the air intake and air outlet.
8. Cover nozzle is prohibited.
