Tritech Gemini 1200ik, Product Manual

Page: 25 / 31

0747-SOM-00004-01 Page 25 of 31
Management of DMD Log Data Files
Setup of the SSC Content Management System
The Un-Tethered system is supplied with a content management cable assembly. When plugged
into the sonar port on the SSC this cable enables an Ethernet connection to be setup between the
SSC and the users PC or laptop. By installing and
using the ‘Content Management Tool’, a separate
software utility, the user can then download and manage any recorded log-
files stored on the SSC’s
internal 256GB SD card. This cable can also be used to install any future updates of the Genesis
sonar control GUI loaded onto the SSC.
Before using the cable you must install the Content
Management Tool application onto your Windows PC.
This program is available from the USB pen drive
supplied with your DMD system.
After installation a purple DMD SSC Management icon will be placed
onto your desktop.
The IP address of the DMD SSC is set to 192.168.2.60 and default address of the
Gemini sonar 192.168.2.201. To communicate with the SSC over the Content
Management Cable you must have your Ethernet network adapter
manually set to
a corresponding IP address 192.168.2.xxx (example 192.168.2.101) with Subnet
Mask 255.255.255.0.
Do not set the PC network address to the same as the DMD SSC or Gemini
sonar.