background image

Operating Instructions Digital Ally DVM-900 Wireless Microphone System 
 

 

Items included in this package with part numbers 
 
 

Description 

DA Part Number  Model Number 

Remote Transceiver 

DVM900-RMT 

DVM-RMT 

In-Car Transceiver 

DVM900-ICT 

DVM-ICT 

ICT Mount Antenna 

DVM900-INA 

DVM-INA 

Magnetic Roof Mount Antenna 

DVM900-EXA 

DVM-EXA 

In-Car Charger Cradle 

DVM900-ICC 

DVM-ICC 

In-Car Charger Cable 

DVM900-CCC 

DVM-CCC 

Wall-Wart Home Office Charger 

DVM900-WWC 

DVM-WWC 

Belt Clip 

DVM900-RBC 

DVM-RBC 

Lapel Microphone 

DVM900-ELM 

DVM-ELM 

 
 
 
 
 
 
System description: 
 
The DVM-900 wireless microphone system operates as part of  Digital Ally’s in-car DVR 
(digital video recorder) system. 
 
The DVM-900 wireless microphone system consists of 2 transceivers.  The first transceiver, 
called the  In-Car Transceiver (DVM-ICT), is mounted inside the DVM.  

 

The second transceiver, called the Remote Transceiver (DVM-RMT), is carried by the 
patrolman either on his belt or lapel.  The Remote Transceiver is a self-contained unit, 
which includes an internal microphone, external microphone/charge jack, battery charge 
terminals, internal rechargeable battery, internal antenna, and 2 buttons for Standby/Off 
and Transmit Record On/Off. 

 

The system operates in the 900 MHz ISM (Instrument Scientific Medical) band and is 
license free.  The system range is 1000 feet.  The DVM-900 wireless microphone system 
uses Frequency Hopping Spread Spectrum (FHSS) Narrow Band FM, which provides 
excellent privacy, security and avoidance of interference.   

 
 

In-Car Transceiver Model Number DVM-ICT 
 

Operating Instructions: 
 

During setup of the DVR, the operator shall program the In-Car Transceiver.  The Remote 
Transceiver security

 

codes shall also be programmed at DVR setup time by sending the 

command to SYNC from the DVR to the In-Car Transceiver via the SPI bus.  The In-Car 
Transceiver will then automatically exchange security information with up to two nearby 
Remote Transceivers that are in ready to SYNC mode. 

 

Summary of Contents for DVM-900







Reviews: