6
Installation
7.
Slide the ON/OFF switch on the front plate to “ON”.
Note:
In the event additional power is needed, a DC-In jack has been
provided. The power supply is not included. See “Powering the Unit”
section for DC-In information.
8.
The enclosure is now ready to use. The blue LED light will
illuminate solid to indicate power and will blink when reading/
writing data.
Specifications:
Drive Connection
22-Pin SATA Data + Power
USB Connection
USB Type-C
LED
Blue: Power and Data Access
Maximum Data Transfer Rate
10 Gbps
Max Drive Capacity
Tested up to 2 TB
Operating Temperature
50° to 122° F (10° to 50° C)
Operating Humidity
10% to 80% RH
USB Type-C and USB-C are trademarks of USB Implementers Forum
