Uses only 2 rack spaces (2U) in standard 19 inch rack
DB9 serial port for network interface; SNMP compatible
Slot for optional SNMP/web card (part# SNMPWEBCARD)
PowerAlert unattended shutdown software and 6 ft. network cable included
Compatible with Tripp Lite's Watchdog system service software
Fault tolerant auto-bypass maintians continuous utility output to connected equipment, even in cases where the UPS is overloaded or
suffers an internal failure that requires service
Diagnostic LEDs
Battery replacement door
Mounting hardware included for 4 post rack enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKIT accessory
$250,000 Ultimate Lifetime
connected equipment insurance
2 year manufacturers product warranty
Specifications
OUTPUT
Frequency
compatibility
50 / 60 Hz
Output VA
1500
Output watts
1200
Output nominal
voltage
120V AC
Output voltage
regulation
Maintains full-time sine wave output within 2% of 120V, less than 5% total harmonic distortion
Output frequency
regulation
Regulates line frequency to 50/60Hz +/- 0.05Hz
Overload protection
Via input breaker
Outlet quantity /
type
6 NEMA 5-15R
Customized load
management
receptacles
"2 individually controllable load banks support automated load shedding and remote reboot on demand of locked
network devices. Configurable via PowerAlert software to automatically switch off optional loads, like monitors, to
increase available runtime for servers and other critical devices. (Bank A consists of 4 outlets / Bank B consists of 2
outlets) "
INPUT
UPS Input cord
length (ft.)
10 ft. 12 gauge
Recommended
Electrical Service
15A 120V
Maximum Input
Amps (A)
12
Maximum Input
Watts
1395
Input connection
type
NEMA 5-15P
Voltage
compatibility (VAC)
120
BATTERY
Expandable battery
runtime
Supports extended runtime with optional external battery pack BP48V212U (multi-pack compatible)
