2 outlets; 6-ft. AC power cord; DC input terminals for 12V battery connection
Converts 12 volt DC to 120 volt AC
Frequency control for operating stability
Advanced 18 amp, 3-stage battery charger and selector switch for gel or wet cell batteries
Resettable circuit breaker protects APS against system overload
Switch allows user to select between off, auto-invert and charge-only settings
6 diagnostic LEDs indicate AC present, on battery, overload, & battery voltage level (high, medium, & low)
Configuration switches to allow the user to select the high and low voltage for the unit to automatically transfer from AC power to battery
backup
Coated internal circuit boards offer continuous operation in humid environments (0-95%, non condensing)
3.5mm port for connecting remote switch (User supplies plug, cable and switch - see manual)
Allows unlimited runtime capability by allowing the use any number of user-supplied batteries
Specifications
OUTPUT
Frequency
compatibility
60 Hz
Output watts
Continuous - 500 watts, Overpower (up to 1 hour) - 750 watts, Double-Boost wattage (up to 10 seconds) - 1000 watts
Output nominal
voltage
AC OUTPUT: 120V AC nominal, DC CHARGER OUTPUT (DC): 12V DC nominal
Output voltage
regulation
LINE POWER (AC): Maintains 120V nominal sine wave output. INVERTER POWER (AC): Maintains PWM sine
wave output voltage of 120 VAC (+/-5%). DC CHARGER OUTPUT (See battery recharge rate section)
Output frequency
regulation
60 Hz (+/- 0.3 Hz)
Overload protection
Circuit breaker
Outlet quantity / type
Includes 2 AC outlets (NEMA 5-15R)
INPUT
Recommended
Electrical Service
DC INPUT: Requires 12V DC input source capable of delivering 50A for the required duration (when used at full
continuous capacity). For automotive applications, professional hardwire installation with 100A battery system fusing
is recommended. AC INPUT
Maximum input
amps / watts
DC INPUT: Full continuous load - 50A at 12VDC, No load - 2.2A at 12V DC. AC INPUT: 8 amps at 120V AC with full
inverter and charger load
Input connection type
DC INPUT: Set of 2 DC input wingnut terminals. AC INPUT: NEMA 5-15P input plug
Voltage compatibility
(VAC)
120
Voltage compatibility
(VDC)
12
BATTERY
Expandable battery
runtime
Runtime is expandable with any number of user supplied wet or gel type batteries
DC system voltage
(VDC)
15
Battery Pack
Accessory (optional)
98-121
sealed lead acid battery (optional)
Battery recharge rate
Includes 20 amp DC charging system
LEDS ALARMS & SWITCHES
Switches
Lighted on/off power switch, plus 2 conductor 3.5 mm port for connecting remote switch - user supplies switch,
3.5mm plug and cable.