6
3. Features
ATS Automatic Transfer Switch
(PDU360AT6G60)
Power Strip* (PDU3V602D354, PDU3V602D354A, PDU3V602D354B)
1
Power Strip Outlets:
These single-phase IEC C13 and C19 outlets receive power from the
interlaced 3-phase power input connections of Source A or Source B of the ATS. These
outlets are not controllable.
2
Power Strip Input Power Cords:
The 7-conductor plugs
contain an 8-position connector that attaches directly to the
ATS.
3
ATS Source A and Source B Input:
The cords are permanently
attached to the ATS and have IEC 309 60A Blue (3P + E)
plugs.
4
Digital Display:
Shows source status, measured values, display
modes and other information. See the
Digital Display
section
for detailed explanations of the indicators and displays.
5
SNMP Reset Button:
Press the reset button for 3 seconds to
reboot the ATS network card. Rebooting the network card will
not erase network settings or interrupt AC power. The reset
button is recessed. Use a paper clip or other suitable object to
press it.
3
8
6 7
5
11
11
12
10
10
2
4
9
9
IEC 309 60A Blue (3P + E)
* PDU3V602D354B model shown. Appearance may vary by model.
1
16-01-031-933588.indb 6
3/22/2016 4:14:19 PM