99
6.6.1.2.
Web Configuration
Parameter
Description
Port
Select a port number to configure its port isolation settings.
Select
All Ports
to configure the port isolation settings for all
ports on the Switch.
Egress Port
An egress port is an outgoing port, that is, a port through which
a data packet leaves.
Selecting a port as an outgoing port means it will communicate
with the port currently being configured.
Select All/
Deselect All
Click
Select All
to mark all ports as egress ports and permit
traffic.
Click
Deselect All
to unmark all ports and isolate them.
Deselecting all ports means the port being configured cannot
communicate with any other port.
Apply
Click Apply to configure the settings.
Refresh
Click this to reset the fields to the last setting.
Port
Isolation
Status
“V” indicates the port’s packets can be sent to that port.
“-” indicates the port’s packets cannot be sent to that port.
Summary of Contents for NGI-S04C2
Page 1: ...1...
