![Tripp Lite NGI-S04C2 Owner'S Manual Download Page 118](http://html1.mh-extra.com/html/tripp-lite/ngi-s04c2/ngi-s04c2_owners-manual_1166093118.webp)
118
(disable/enable)
configure snmp trap-event
stp-topology-change
(disable/enable)
This command enables/disables the
stp-topology-change trap.
configure snmp trap-event
traffic-monitor
(disable/enable)
This command enables/disables
thetraffic-monitor trap.
8.1.3.2.
Web Configuration
The features allow users to enable/disables individual trap notification.
Alarm-Over-Heat
Alarm-Over-Load
Alarm-Power-Fail
- Trap when system’s temperature is too high.
- Trap when system is over load.
- Trap when system power is over voltage/under
voltage/RPS over voltage/RPS under voltage.
BPDU-Guard
Loop-Detection
Port-Admin-State-Change
Port-Link-Change
STP-Topology-Change
Traffic-Monitor
- Trap when port is blocked by BPDU Guard/BDPU
Root Guard/BPDU port state changed.
- Trap when port is blocked by Loop Detection.
- Trap when port is enabled/disable by administrator.
- Trap when port is link up/down change.
- Trap when the STP topology change.
- Trap when port is blocked by Traffic Monitor.
.
Parameter
Description
Trap Event State Settings
Select all
Enables all of trap events.
Deselect All
Disables all of trap events.
Summary of Contents for NGI-S04C2
Page 1: ...1...