Tripp Lite NGI-M08C4-L2, Owner'S Manual

Page: 37 / 313

37
5.1.2. Jumbo Frame
Jumbo frames are Ethernet frames with a payload greater than 1500 bytes. Jumboframes can
enhance data transmission efficiency in a network. The bigger the frame size, the better the
performance.
Notice:

The default jumbo frame is 10240 bytes.

The jumbo frame settings will apply to all ports.

If the size of a packet exceeds the jumbo frame size, the packet will be dropped.

The available values are 1522, 1536, 1552, 9010, 9216,10240.
5.1.2.1. CLI Configuration
Node Command Description
enable show jumboframe This command displays the current jumbo
frame settings.
enable configure terminal This command changes the node to configure
node.
configure interface IFNAME This command enters the interface configure
node.
interface jumboframe(10240|1522|1536|1
552|9010|9216)
This command configures the maximum
number of bytes of frame size.
configure interface range
gigabitethernet1/0/PORTLISTS
This command enters the if-range configure
node.
if-range jumboframe(10240|1522|1536|1
552|9010|9216)
This command configures the maximum
number of bytes of frame size.