Tripp Lite NGI-M08C4-L2, Owner'S Manual

Page: 300 / 313

300
9.7.1 CLI Configurations
Node Command Description
enable show user account This command displays the current user accounts.
enable show dot1x username This command displays the dot1x user accounts.
configure add user
USERNAME
PASSWORD
(normal|admin|dot1x)
This command adds a new user account with choice
of privileges
normal/admin/dot1x
.
configure delete user
USERNAME
This command deletes a present user account.
configure dot1x username
USERNAME
PASSWORD
This command creates a user account for DOT1X
local authentication.
configure no dot1x username
USERNAME
This command removed a user account for DOT1X
local authentication.
Example:
L2SWITCH#configure terminal
L2SWITCH(config)#add user q q admin
L2SWITCH(config)#add user 1 1 normal
9.7.2 Web Configurations
Parameter Description
User Account Settings
User Name Type a new username or modify an existing one.
User Password
Type a new password or modify an existing one. Enter up to 32
alphanumeric or digit characters.