Tripp Lite NGI-M08C4-L2, Owner'S Manual

Page: 158 / 313

158
Refresh Click Refresh to begin configuring this screen afresh.
6.8.3 LACP Information
6.8.3.1 CLI Configurations
Node Command Description
enable show lacp internal
[GROUP_ID]
This command displays the LACP internal
information for the specific group or all groups.
enable show lacp neighbor
[GROUP_ID]
This command displays the LACP neighbor’s
information for the specific group or all groups.
6.8.3.2 Web Configurations
Parameter Description
LACP Information
Group ID Select a LACP group that you want to view.
Apply Click Apply to take effect the settings.
Neighbors Information
Port The LACP member port ID.
System Priority
LACP system priority is used to determine link aggregation group
(LAG) membership, and to identify this device to other switches
during LAG negotiations. (Range: 0-65535; Default: 32768)