Tripp Lite NGI-M05-C1, Owner'S Manual, Page: 88 / 254

88
Parameter Description
Group Settings
Profile
This field selects the profile which you want to configure the
group.
Group
This field selects the group index.
Start Address The field configures the first multicast address of the group.
End Address The field configures the last multicast address of the group.
Apply Click Apply to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
6.2.2.3. Port Settings
6.2.2.3.1. CLI Configuration
Node Command Description
enable show igmp-snooping filtering This command displays the IGMP
snooping filtering configurations.
enable configure terminal This command changes the node to
configure node.
configure interface IFNAME This command enters the interface
configure node.
interface igmp-snooping filtering profile
STRING
This command enables the IGMP
snooping filtering profiles on the
specific port.
interface no igmp-snooping filtering
profile STRINGS
This command disables the IGMP
snooping filtering profiles on the
specific port.
configure interface range
gigabitethernet1/0/PORTLISTS
This command enters the if-range
configure node.
if-config igmp-snooping filtering profile
STRING
This command enables the IGMP
snooping filtering profiles on the range
of ports.
if-config no igmp-snooping filtering
profile STRINGS
This command disables the IGMP
snooping filtering profiles on the range
of ports.