223
View Subtree
The OID defining the root of the subtree to add to (or exclude
from) the named view.
View Type
Select
included
or
excluded
to
define subtree adding to the
view or not.
Apply
Click
Apply
to take effect the settings.
Refresh
Click
Refresh
to begin configuring this screen afresh.
SNMPv3 View Status
View Name
This field displays the v3 view name.
View Subtree
This field displays the subtree.
View Type
This field displays the subtree adding to the view or not.
Action
Click
Delete
to remove a v3 view.
9.2.
Auto Provision
Auto provision is a service that service provider can quickly, easily and automatically
configure remote device or doing firmware upgrade at remote side.
1.
When the Auto Provision is enabled, the Switch will download the auto provision
information file from the auto provision server first.
The file name is followed below naming rule:
Model_Name_Autoprovision.txt
For Example:
9015-8GT2GS
_Autoprovision.txt
The contents of the file are listed below:
AUTO_PROVISION_VER=1
Firmware_Upgrade_State=1
Firmware_Version=9015-000-1.1.0.S0
Firmware_Image_File=9015-000-1.1.0.S0.fw
Firmware_Reboot=1
Global_Configuration_State=0
Global_Configuration_File=9015-000-1.1.0.S0.save
Global_Configuration_Reboot=0
Specific_Configuration_State=0
Specific_Configuration_Reboot=0
2.
If AUTO_PROVISION_VER is biggest than current auto provision version, do step
3; otherwise, wait 24 hours and go back to step 1.
3.
If the Firmware_Upgrade_State =1, do step 4; otherwise, do step 6.