169
7.1.1.1.2.
Web Configurations
Parameter
Description
DHCP Snooping Settings
State
Select
Enable
to use DHCP snooping on the Switch. You still
have to enable DHCP snooping on specific VLANs and
specify trusted ports.
Note: The Switch will drop all DHCP requests if you enable
DHCP snooping and there are no trusted ports.
Select
Disable
to not use DHCP snooping.
VLAN State
Select
Add
and enter the VLAN IDs you want the Switch to
enable DHCP snooping on. You can designate multiple
VLANs individually by using a comma (,) and by range with
a hyphen (-).
Select
Delete
and enter the VLAN IDs you no longer want the
Switch to use DHCP snooping on.
Apply
Click
Apply
to take effect the settings.
Refresh
Click
Refresh
to begin configuring this screen afresh.
DHCP Snooping Status
DHCP Snooping
State
This field displays the current status of the DHCP
snoopingfeature,
Enabled
or
Disabled
.
Enabled on VLAN
This field displays the VLAN IDs that have DHCP snooping
enabled on them. This will display
None
if no VLANs have
been set.