Tripp Lite NGI-M05-C1, Owner'S Manual, Page: 102 / 254

102
6.3.2.3.2. Web Configurations
Parameter Description
Port Settings
Port
Select a port number to configure from the drop-down box.
Select All to configure all ports at the same time.
PVID
Select a PVID (Port VLAN ID number) from the drop-down
box.
Acceptable Frame
Specify the type of frames allowed on a port. Choices are All ,
VLAN Untagged Only
or
VLAN Tagged Only
.
- Select All from the drop-down list box to accept all untagged
or tagged frames on this port. This is the default setting.
- Select VLAN Tagged Only to accept only tagged frames on
this port. All untagged frames will be dropped.
- Select VLAN Untagged Only to accept only untagged frames
on this port. All tagged frames will be dropped.
Apply Click
Apply
to take effect the settings.
Refresh Click Refresh to begin configuring this screen afresh.
Port Status
Port This field displays the port number.
PVID This field displays the Port VLAN ID number.
Acceptable Frame
This field displays the type of frames allowed on the port. This
will either display All or VLAN Tagged Only or VLAN
Untagged Only.