5
2b. Mount on Solid Brick and Concrete Block
With the up arrow of the
template pointing upward
WARNING
• When installing wall mounts on cinder block, verify the actual concrete thickness
is at least 1-3/8” (35mm) for using the concrete anchors. Do not drill into mortar
joints! Be sure to mount in a solid part of the block, generally 1” (25mm) minimum
from the side of the block. It is suggested an electric drill on a slow setting be used
to drill the hole instead of a hammer drill to avoid breaking out the back of the hole
when entering a void or cavity.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
Screw the wall
mount onto
the wall
Drill pilot holes
2
Find and mark the
exact location of
mounting holes
1
Anchor Bolt
Concrete Anchor D6 Washer
13-08-141-933296.indb 5
8/15/2013 2:09:22 PM
