background image

 

FLOOR MACHINES

Q-LINE SERIES

MODELS Q-17 & Q-20

                    OPERATING & MAINTENANCE

INTRODUCTION                                            INSTRUCTIONS

READ THIS BOOK

This operator’s book has important information for the
use and safe operation of this machine.  Read this book
carefully before starting the machine.  Keep this book
and tell all operators to read the book.  If you do not
follow the instructions, you can cause an injury or dam-
age equipment, furniture or buildings.

For new books write to:

Triple S
2 Executive Park Drive
Billerica, MA  01862

Carefully inspect all components to ensure that there is
no concealed freight damage.  If such damage is dis-
covered, file a “CONCEALED DAMAGE REPORT” im-
mediately with the delivering carrier.

The contents of this manual are based on the latest
product information available at the time of publication.
Triple S  reserves the right to make changes or improve-
ments to its machines without notice.

FOR YOUR CONVENIENCE, RECORD THIS
IMPORTANT INFORMATION:

MODEL

_______________________________

SERIAL NUMBER

_______________________

PART NUMBER

 _________________________

DATE PURCHASED

_____________________

Summary of Contents for Q-17









Reviews: