Triomph ETF1525, Instruction Manual

Page: 10 / 12

9
Maintenance
Clean after each use. Disconnect plug and wait until the unit has cooled
down. If the pots/pans are used without being cleaned, as this may result in
discoloration or stains. Do not use fuel, paint thinner, scrubbing brush or
polishing powder to clean the induction stove.
Wipe down the unit using a dish washing agent and a damp cloth. Use
vacuum cleaner to suck up dirt from the air intake and exhaust vent.
Never run water over the unit (if water gets inside it may cause malfunction).
Error Code List:
–
If LED-display shows the error code, please reference to the solution as
following.
Error Code Cause and Solution
The unit is in
standby mode,
but the
LED-display
shows “ --- “ ,
and the unit
sounds “ Dee,
Dee, …”
1)You are using the cookware without the magnetism
bottom or the diameter of the bottom is less than
12cm. Please use the cookware with magnetic and flat
base, such as the iron or cast iron cookware, the
cookware with a 18/0 stainless steel base. And all
cookware with a base whose diameter is 12 to 22cm.
The device will enter into standby mode after 10
second without the suitable cookware.
Press ON/STANDBY to restart the unit.
2) After press ON/STANDBY, press CHALEUR or TEMP
key to turn on the unit.
E01 Voltage is under 145V
E02 Voltage is over 275V
E03 The accessory and spare parts are damaged, please
contact the nearest authorized service facility for
trouble shooting, repair and adjustment.
E06 The accessory and spare parts are damaged, please
contact the nearest authorized service facility for
trouble shooting, repair and adjustment.
E07 The appliance is too hot. The cooking temperature is
over 240
℃
. After the unit has been cooled down (at
least 30mins), the unit would be automatic switches to
standby mode. Press ON/STANDBY to restart the unit.