Trio Motion Coordinator Euro 205, Technical Reference Manual

Page: 236 / 566

8-46 Trio BASIC Commands
Input / Output Commands
Trio Motion Technology
AIN0..7 / AINBI0..7
Type:
System Parameter
Description: These system parameters duplicate the AIN() command.
They provide the value of the analog input channels in system parameter format to
allow the
SCOPE
function (Which can only store parameters) to read the analog
inputs.
The value returned is a decimal representation of the voltage input and is in the
range 0 to 4095 corresponding to voltage inputs in the range 0V to 4.096V. With the
alternative forms AINBI0..AINBI3 The value returned is a decimal representation of
the voltage input and is in the range -2048 to 2047 corresponding to voltage inputs
in the range -2.048V to 2.047V.
CURSOR
Type:
Command
Description:
The
CURSOR
command is used in a print statement to position the cursor on the Trio
membrane keypad and mini-membrane keypad.
CURSOR(0), CURSOR(20), CUR-
SOR(40),CURSOR(60)
are the start of the 4 lines of the 4 line display.
CURSOR(0)
and CURSOR(20)
are the start of the 2 line display.
Example:
PRINT#3,CURSOR(60);">Bottom line";
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 45 47 48 49 50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79
4 Line Display as featured on the Membrane Keypad